Aluminum Watercolor Easel
Assembly and Use Instructions
For model HAE660
Parts Included:
A
Easel Body
A
B
C
D
E
G
F
H
M
J
L
K
B
Center Bar
D
Extension Bar
C
Pivot Head
F
Top End Bracket (6")
G
Bottom End Bracket (10")
K
T-Bolts for securing
End Brackets (2 pcs.)
J
Bolt and Nut for
securing Pivot Head
L
Screw knobs for securing
End Brackets (2 pcs.)
M
Thumbscrews for securing
Center and Extension Bars (4 pcs.)
E
Canvas Tray
H
Nylon Storage Bag
Secure Center Bar
Position pivot head (
C
) in the middle of center bar (
B
). Insert thumbscrews (
M
) and tighten gently.
Attach Pivot Head
Use bolt and nut (
J
) to connect pivot head to easel body. Tighten firmly.
Extend Legs
Open easel body (
A
) and extend legs to desired length. Press levers to lock and unlock.
Attach End Brackets to Center Bar
Slide T-bolt (
K
) into center bar track, place end bracket (
F
or
G
) over bolt, attach screw knob (
L
)
and tighten gently.
Attach Extension Bar to Center Bar
(optional)
The extension bar is only needed for panels and canvas between 25" and 36".
Slide extension bar (
D
) into center bar, insert thumbscrews from below and tighten gently.
Attach Canvas Tray
Align support posts with tray holes that are equidistant from center, and snap into place by
pushing down gently.
1
1
2
2
3
3
4
5
6
6
To Assemble:
4
5
