Alvaro Banos LeonS90.20-V3 Blanco, Руководство по установке

Страница: 21 / 41

19
Water inlet is running
without stopping,
spout a lot of water,
but no steam comes
out.
1. The water level sensor loosens. (Tighten it)
2. The water inlet valve is broken. ( Replace it)
3. Steam Generator or Electric Box is broken. (Replace it)
Leak-protection
switch works
1. Leakage of the AC220V power supply. ( Bind it)
2. Leakage of the heater inside the steam generator. ( Replace it )
3. The leak-protection switch is not good. ( Replace it )
Smoke comes from
steam output, or bad
smell
1. Inside the Steam Generator, the water level wire is in short circuit or there is
water in the level sensor.
( Debug the short circuit and dry the level sensor)
2. Steam Generator or Electric Box is broken. (Replace it)
Get an electric shock,
but the leak-
protection switch
doesn’t work.
The ground wire doesn’t connect well. (Please make sure that the ground wire of
the shower room connect the ground well)
Appendix: 1. Installation of Keyboard