manualshive.com logo in svg

Alvarion BreezeACCESS SU-A-EZ, Руководство по эксплуатации продукта, Страница: 73 / 165

Поделиться
Скачать
Alvarion BreezeACCESS SU-A-EZ Скачать руководство пользователя страница 73

Chapter 4 - Web-managed Configuration

Wireless Settings

BreezeACCESS SU-A-EZ

56

 Product Manual

All Ports (RTP and RTCP)

 - Both RTP (Real Time Protocol) and RTCP (Real 

Time Control Protocol) traffic is prioritized.

Even Ports (RTP only)

 - Only RTP (Real Time Protocol) traffic is prioritized.

The default value is All Ports (RTP and RTCP).

UDP Port Ranges

 – Defines priority port ranges for UDP traffic. You can enter a 

list of up to 64 port numbers and/or ranges. Use hyphens to separate start/end 
port numbers within a range. Use commas to separate entries.

Example: 9800,9000-9007,9010,9022-9036

TCP Port Ranges

 – Defines priority port ranges for TCP traffic. You can enter a 

list of up to 64 port numbers and/or ranges. Use hyphens to separate start/end 
port numbers within a range. Use commas to separate entries.

Example: 9800,9000-9007,9010,9022-9036

IP Range Option

 – This option prioritizes frames with source/destination IP 

address matching the predefined IP range. The available settings are:

Disable

 - IP Range Prioritization is disabled.

Source IP

 - Frames with matching source IP addresses are prioritized.

Destination IP

 - Frames with matching destination IP addresses are 

prioritized.

Source or Destination IP

 - Frames with matching source or destination IP 

address are prioritized.

The default value is Disable.

IP Range Start Address

 – IP address which, in conjunction with the IP range 

mask, defines the IP Range used for prioritization (Range: 4 groups of up to 3 
digits separated by dots, Default: 0.0.0.0).

IP Range Mask

 – IP mask which, in conjunction with the IP range start address, 

defines the IP Range used for prioritization (Range: 4 groups of up to 3 digits 
separated by dots, Default: 255.0.0.0).

Regulatory Domain

 – The regulatory domain for the SU-A-EZ is preset for the 

country of intended operation and may only be configured through the CLI, (see 

“Regulatory Domain Commands” on page 84

.) Within the allowed domain for your 

country of operation you may limit transmission on certain band frequencies by 

Содержание BreezeACCESS SU-A-EZ






































































































































































Отзывы:

Нет отзывов