Alvarion 43222600, Системное руководство

Страница: 37 / 129

WBSn-2400 and WBSn-2450 System Manual
Chapter 3 - Base Station ManagementStatus
Chapter 3 - Base Station Management Status
27
The value on the top left box denotes the current received signal strength in dBm. The color of the
vertical bar indicates the relative quality.
The box directly below it shows the current TX-CCQ (connection quality), in %. The color of the vertical
bar indicates the relative quality.
The bottom left box shows a realtime graph of the received signal strength (in dBm) over the last 60
seconds. The box directly to its right shows a realtime graph of the TX-CCQ (in %) over the last 60
seconds.
On the right of this section, there is a vertical bar showing the current received signal strength at the
antennas. The color of the vertical bar indicates the relative quality.
3.2.1.2 Mesh
The Mesh section is available only for devices operating in Mesh mode. The contents depend on the
Mesh mode:
„
Mesh Quality : Available only for a device operating in Mesh AP mode. The quality of the Mesh in %.
The background color indicates the relative quality.
„
Number of Hops : Available only for a device operating in Mesh AP mode. The current location of
the unit in the Mesh leaf. The lowest number is 1, meaning the next hop is the Root-AP.
„
Associated Mesh Uplinks : The BSSID(s) of the associated Mesh AP(s) (if any).
Figure 3-5: Status Overview Page, Mesh Uplink Status Section
Figure 3-6: Status Overview Page, Mesh Section