HOW TO INSTALL
THE HALF FORM STAND
COMPONENTS IN THE PACKAGE
( v1.0 )
Main Pole
INSTALLATION
Step 1
Cut and open the end of the plastic wrap on the
main pole and remove the plastic cover from
bottom tip.
Step 2
Install the main pole onto the base stand.
•
Release two locking knobs from the base stand.
•
Insert the bottom tip of the pole into the hole of the base stand.
1 / 2
Base Stand
Step 3
Install the half form into the stand pole.
Step 4
Hold the bottom part of aluminum pole and
turn the half form until the half form is locked
firmly into the stand.
CAUTION
Remember to fully insert the pole below the
grey painted area.
• Tighten two locking knobs.
• Dispose the plastic wrap on the main pole.