Alutech CUL01, Руководство по подключению и эксплуатации

Страница: 10 / 16

CONNECTION AND OPERATIONAL MANUAL. CONTROL UNIT CUL01
8 8
OPERATION
5. OPERATION
In order to supply power to the circuit put the line circuit breaker
1
( pic . 1) into
I
position.
0
cir-
cuit breaker position— Off .
Dock leveller operation
:
The platform is lifted if the key 2 ( pic. 2) is pressed and held down ( pic. 2). The lip is swung into the
extreme top position. When the lip is lifted completely by making a single plane with the core
platform part release the key. The platform will start lowering automatically into an intermediate
position until reaching the vehicle loading level.
Platform return to its original position:
In order to return the platform to its original position press and hold down the key 2 ( pic. 1)
until the lip is folded down. Release the key, and the platform will return automatically to its
original position. Control unit must be serviced as part of the dock leveller strictly according to
the existing normative documents.
6. STORAGE, TRANPORTATION AND UTILISATION
Items must be stored packaged in a closed dry room. Avoid precipitation and direct sunlight.
Shelf life is 3 years from the date of manufacture. Transportation is possible by all types of
enclosed and roofed land transport fitted with restraints to prevent impacts and movement
whilst inside the vehicle.
The item is utilised in accordance with laws and regulations on recycling and utilisation
which are in force in the country of the customer. The item does not contain precious
metals and substances dangerous for life, health and environment.
Y
The package must be utilised in accordance with existing legislation.
7. WARRANTy
The item works well if it is stored, transported, adjusted and run according to the existing rules;
if installation and technical service are provided by the organisation specialising in automation
systems and responsible for installing and technical service.
Warranty period is 2 years and it starts from the date of item transfer to the applicant or from the
manufacture date if the date of transfer is unknown. During the warranty period, all breakages
for which the manufacturer is responsible are repaired by the warranty service department.
Note: parts replaced under warranty belong to the service department which has repaired the item.
Item warranty is not valid in case of :
•
breaking the item storage, transport, operation and installation regulations;
•
when the item is installed, adjusted, repaired, reinstalled or remade by unauthorised persons;
•
item becomes damaged because supply network operates unstably or network
parameters do not comply with manufacturer’s values;
•
item damage because of water ingress;
•
force majeure (fire, lightning, flood, earthquake or other natural disasters);
•
when the item construction has been broken by customers or third parties;
•
breakages and defects when there is no planned service maintenance and inspection;
•
absence of a completed (filled-in) manual.
More information about service departments: http://www.alutech-group.com/feedback/service/