Alula RE636 Wireless Outdoor Siren Strobe Connect+ Encrypted Скачать руководство пользователя страница 1

The RE636 Wireless Outdoor Siren Strobe 

is an auditory 

warning device that produces high volume warning sounds and 

visual strobing.

Features

•  Multi-cadence siren 

•  100 dBA minimum at 1m

•  2-5 year battery life (batteries included) or AC powered 

(RE012-17 sold separately)

•  5-year warranty

Sounds

 

a high volume warning for burglary, smoke and carbon 

monoxide alarm conditions. Volume is adjustable through the 

Installer application, or through the interactive service 

provider’s web portal.

Enroll

 

by placing the panel and siren into wireless enrollment 

mode. The siren’s PWR and RF LEDs will blink back and forth 

when in enrollment mode. If the siren has never been enrolled, 

enrollment mode will start automatically when opening the 

cover. To overwrite a previously enrolled ID, power up the 

device while holding the tamper. When the red RF LED 

illuminates, release the tamper switch. After enrolling the siren, 

take the panel out of wireless enrollment mode.

 

Replace batteries

 

by opening the cover and removing the inner 

cover to gain access to the 3 C-cell batteries. 

• To remove inner cover, push down the two latches, then 

pull out the clear inner cover. 

Mounting

 

can be done by securing the siren to a surface with the 

mounting screws (included) at the three slotted mounting holes. 

Ensure arrows inside are pointed up.

 

Pro Tips

• Cover can hang from bottom of enclosure and inner cover can 

clip into cover for convenience while work is being done inside 

enclosure.

• To change the strobe lens, unscrew the cover screw until it 

is past the lens, and then push on the corner of the lens to 

loosen and remove. Select desired color.

• Power (PWR) LED will turn on when the siren is awake (every 

18 seconds on battery and always when powered from wall). 

• RF LED will blink when a packet is received.

• Enroll packets are automatically sent every 18 seconds when 

in enroll mode. Pressing or releasing the tamper switch while 

sensor is in enroll mode will send another enroll packet.

Use the panel installation guide to verify proper system setup.

RE636 Wireless Outdoor Siren Strobe

 Encrypted

IN

STALL

G

U I D E

I

Mounting Holes

Inner cover 

removal 

latches

•  Once the siren is properly enrolled, test functionality in a 

desired location.

•  The panel supports up to eight RE636 sirens at one time.

Отзывы: