Chapter 4. Administration
35
Alert Settings:
The Port Alert Settings dialog box provides a way for you to be informed via
email about problems that may occur on the devices connected to the SN0108
/ SN0116's ports. When a device has a problem - such as a critical error that
requires a reboot - debug messages can be sent through its COM port.
Note:
This function only works when the Operating Mode is set to
Console
Management
When the SN0108 / SN0116 receives such a message, it can send an email to
inform the user specified here of the problem. You can have up to 10 types of
alert emailed to you when a device generates them.
To configure a port to provide alert notification, do the following:
1. Select it in the
Select
column of the Port Configuration dialog box (see
page 31), then click the
Alert Settings
button. A dialog box, similar to the
one below, appears:
2. Use the
Alert String
fields to specify the alerts you want to receive.
sn816.book Page 35 Thursday, January 8, 2009 4:56 PM
