SN0108 / SN0116 User Manual
90
4. Select either
Obtain an IP address automatically (DHCP)
, or
Specify an
IP address
. If you chose the latter, fill the IP Address, Subnet Mask, and
Gateway fields with the information appropriate to your network.
5. Click
Set IP
.
6. After the IP address shows up in the Device List, click
Exit
to end the
program.
Method 2:
1. Set your computer's IP address to 192.168.0.
XXX
Where
XXX
represents any number or numbers except 10. (192.168.0.10 is
the default address of the SN0108 / SN0116.)
2. Specify the switch's default IP address (192.168.0.10) in your browser, and
you will be able to connect.
3. Assign a fixed IP address for the SN0108 / SN0116 that is suitable for the
network segment that it resides on.
4. After you log out, be sure to reset your computer's IP address to its original
value.
Method 3:
A fixed IP address can also be assigned with the ARP command as follows:
1. Turn off the power to the SN0108 / SN0116.
2. Enter the following command:
arp -s <ip address> <SN0108 / SN0116's MAC address>
Where the IP address that you assign is one suitable for the network
segment that the SN0108 / SN0116 resides on.
Note:
The SN0108 / SN0116's MAC address can be found on its bottom
panel.
3. Turn the power to the SN0108 / SN0116 back on.
sn816.book Page 90 Thursday, January 8, 2009 4:56 PM
