Altusen KN9108: KN9116, Руководство пользователя

Страница: 49 / 132

Chapter 3. Administration
39
Miscellaneous
The functions performed by the remaining elements at the bottom of the screen
are described in the table below:
Item Description
Reset on exit Placing a check here causes the KN9108 / KN9116 to reset
itself and implement all the new changes when you log out.
Following the reset, wait approximately 30 to 60 seconds
before logging back in. For example, if you change the IP
address in the Network dialog box, you must open this page
and enable
Reset on exit before logging out. Otherwise, the
change will not take effect.
Reset Values Clicking this button undoes all changes that have been made
to the Configuration and Administration pages (except for port
names, usernames, and passwords) and returns the
parameters to the original factory default settings (see
OSD
Factory Default Settings , page 113).
Clear Name List This function clears the Port Names on the Main page.
kn9108_9116_2007-09.book Page 39 Friday, September 21, 2007 10:39 AM