Altusen KN2132 Скачать руководство пользователя страница 60 | Manualshive

Страница: 60 / 310

Altusen KN2132 Скачать руководство пользователя страница 60

KVM Over the NET™ User Manual

44

The File Menu

The

File Menu

allows the operator to Create, Save, and Open user created

Work files. A Work File consists of all the information specified in a Client
session. This includes the Server List and Server IP list items, as well as the
Hotkey settings.

Whenever a user runs the Client program, it opens with the values contained in
the

current work file

. The current work file consists of the values that were in

effect the last time the program was closed.

The File menu consists of the following items:

New

Allows the user to create a named work file so its values will not
be lost, and it will be available for future recall.

Open

Allows the user to open a previously saved work file and use the
values contained in it.

Save

Allows the user to save the values presently in effect as the

current work file

.

Exit

Exits the WinClient.

«
...
58
59
60
61
62
...
»

Содержание KN2132























































































































































































































































































































Отзывы:

Нет отзывов