Altusen KN2132, Руководство пользователя

Страница: 286 / 310

KVM Over the NET™ User Manual
270
Internal Serial Interface Configuration
The KVM Over the NET™ switch provides a function that lets you configure
an attached device’s serial interface parameters from within any accessed
server. To do so:
1. From the accessed server, open a command line (terminal) session or third
party serial application such as HypterTerminal or PuTTY.
2. Telnet or SSH to the KVM Over the NET™ switch’s IP address.
3. Log in with your usual Username and Password to bring up the access
screen:
Navigation
The left panel shows the KVM Over the NET™ switch at the top, and all the
serial interface devices connected to it listed below. The right panel shows the
configuration parameters at the top, with the configuration settings in the area
below.
Š
Use the Left and Right Arrow keys (
←
and
→
) to move the highlight bar
between the right and left panels, and to select the parameter to configure.
Š
Use the Up and Down Arrow Keys (
↑
and
↓
) to select among the switch
and the serial devices in the left panel; use them to select the configuration
items in the right panel.