Altusen KL9108, Руководство пользователя

Страница: 99 / 158

Chapter 6. Windows Client Port Operation
87
Multiuser Operation
The KL9108 / KL9116 supports multiuser operation. Up to 32 users can log in
at the same time. When multiple users simultaneously access the KL9108 /
KL9116 switch from remote computers, the rules of precedence that apply are
shown in the following table:
Note: We recommend that the user who starts Panel Array Mode set it to
display at least four panels; otherwise, it is possible that other users may
receive only part of the picture.
Operation Rule
General Once a user invokes the OSD, no other user can invoke it until
the original user closes it.
Auto Scan Mode If a user has invoked Auto Scan Mode (see page 88), but the
OSD has not been invoked, another user can interrupt Auto
Scan Mode by invoking the OSD.
Panel Array Mode
Š
When a user has invoked Panel Array Mode (see page 85),
all successive users automatically enter Panel Array Mode.
Panel Array Mode continues until the original user stops it.
(Administrators can override Panel Array Mode.)
Š
Only the user who starts Panel Array Mode can use the Skip
Mode (see page 89) function.
Š
Only the user who starts Panel Array Mode can switch ports.
Other users automatically switch to the ports that the original
user selects. However, if an individual user does not have
access rights to the port that the original user switches to,
the user will not be able to view that port.
Š
Individual users can increase or decrease the number of
panels they wish to view in Panel Array Mode; however, the
picture quality may decrease as the number of panels
decreases.