Altusen KL9108, Руководство пользователя, Страница: 79 / 158

67
Chapter 6
Windows Client Port Operation
Activating the OSD
After you have successfully logged in (see page 61), to activate the browser-
based Windows Client OSD do the following:
1. Click the Windows Client button (the one without the arrow) at the left of
the Webpage.
Note: 1. You must have DirectX 7.0 or higher installed on your computer.
If not, the Windows Client will not load. If you don't already have
it, DirectX is available for free download from Microsoft's
Website: http://www.microsoft.com/downloads.
2. The Windows Client button with the arrow is for running the AP
version of the Windows Client (see page 111 for details).
2. When the file download security warning dialog box appears, click Run .
3. If a second security warning dialog box appears, click Run again.
Note: 1. If the browser cannot run the file, save it to disk, instead. Then,
with your browser still open to the KL9108 / KL9116 Webpage,
run the file from your disk.
2. If you use the save to disk method, for security purposes, you
cannot simply run a previously downloaded version of the
program. Each time you want to access the KL9108 / KL9116,
you must log in to the Webpage with a valid username and
password to download a fresh copy of the program.
(Continues on next page.)