Altusen KL9108, Руководство пользователя, Страница: 21 / 158

Chapter 1. Introduction
9
Keyboard Module
(Continues on next page.)
No. Component Description
1 Port LEDs
Š
An On Line LED lights to indicate that the device attached
to its corresponding port is up and running.
Š
A Selected LED lights to indicate that the computer
attached to its corresponding port has the KVM focus.
2 Keyboard Standard 105-key keyboard
2 Touchpad Standard mouse touchpad
4 Reset Switch
Š
Pressing and holding this switch in while powering on the
unit causes the KL9108 / KL9116 to revert to the original
factory installed firmware version – allowing you to recover
from a failed firmware upgrade.
Š
Pressing and holding this switch in for more than three
seconds performs a system reset.
N ote: The switch is recessed and must be pushed with a thin
object - such as the end of a paper clip or a ballpoint pen.
5 Port Selection
Switches
Š
The left button (DOWN), shifts the KVM focus down
through the ports (Port 7
→
Port 6, etc.). After Port 1, it
cycles back to the last port.
Š
The right button (UP), shifts the KVM focus up through the
ports. After the last port, it cycles to Port 1.
2
3
1
7
9
8
4
6
5