Altusen KH1508a, Руководство пользователя

Страница: 39 / 82

Chapter 4. OSD Operation
29
SCAN/SKIP
MODE Selects which computers will be accessed under Skip mode (see F5:
SKP , page 34), and Auto Scan mode (see F7: SCAN , page 36).
Choices are:
ALL
–
All the ports which have been set Accessible (see SET
ACCESSIBLE PORTS , page 31);
QUICK VIEW
–
Only those ports which have been set Accessible and
have been selected as Quick View Ports (see SET QUICK VIEW
PORTS , page 30);
POWERED ON
–
Only those ports which have been set Accessible
and are Powered On;
QUICK VIEW + POWERED ON
–
Only those ports which have been
set Accessible and have been selected as Quick View Ports and are
Powered On. The default is ALL.
SCREEN
BLANKER If there is no input from the console for the amount of time set with this
function, the screen is blanked. Key in a value from 1–30 minutes, then
press
[Enter] . A setting of 0 disables this function. The default is Off.
HOTKEY
COMMAND
MODE Enables / Disables the Hotkey function (see Hotkey Operation ,
page 39), in case a conflict with programs running on the computers
occurs. The default is On.
HOTKEY This setting selects the Hotkey invocation keys (see Hotkey Operation ,
page 39). Choices are [NUM LOCK] + [-] , or [CTRL] + [F12] . The
default is [NUM LOCK] + [-] .
SET OSD
LANGUAGE Sets the language that the OSD displays in. Choices are: English,
German, Japanese, Simplified Chinese and Traditional Chinese.The
default is English.
SET
CONSOLE
KEYBOARD Sets the keyboard language mapping of the console keyboard. The
default is Auto. If the switch does not automatically receive language
mapping from the keyboard, it will set to English (US).
SET
LOGOUT
TIMEOUT If there is no input from the console for the amount of time set with this
function, the operator is automatically logged out. A login is necessary
before the console can be used again.
This enables other operators to gain access to the computers when the
original operator is no longer accessing them, but has forgotten to log
out. To set the timeout value, key in a number from 1–180 minutes,
then press
[Enter] . If the number is 0 (zero), this function is disabled.
Default is Off.
Note: T his feature does not function if Set Login Mode is disabled.
See SET LOGIN MODE , page 33.
ACTIVATE
BEEPER Choices are Y (for Yes), or N (for No). When activated, the beeper
sounds whenever a port is changed, when activating the Auto Scan
function (see
F7: SCAN , page 36), or an invalid entry is made on an
OSD menu. The default is On.
Setting Function