9
Chapter 2
Hardware Setup
Desktop and Rack Mounting
You can place the KE8220 on the desktop, or rack mount it to a system rack,
ceiling, or wall. The KE8220 requires 0U of rack space.
Rack Mounting
A rack mount kit is included with the KE8220 to mount it to a system rack,
ceiling, or wall. The following steps show how to rack mount the KE8220;
however, you can follow this procedure to mount it to any flat surface.
To rack mount the KE8220:
1. Using a Phillips head hex screwdriver, remove the screws (total 2) from
the bottom of the KE8220 (as shown in the figure below).
(Continues on next page.)
1. Important safety information regarding the placement of this
device is provided on page 67. Please review it before proceeding.
2. Ensure that all equipment to be connected is powered off.
3. Make sure that all devices you will be connecting up are properly
grounded.