Altusen ALTUSEN KN2116, Руководство пользователя, Страница: 78 / 141

KN2108 / KN2116 User Manual
62
Port Operation
Select a port on the OSD Main Screen either by moving the highlight bar to it
with the Up and Down Arrow keys and pressing
Enter , or by Double Clicking
it. Once you select a port, its screen displays on your monitor, and your
keyboard and mouse input affects the remote system.
The OSD Toolbar
The OSD provides a toolbar to help you control the KN2108 / KN2116 from
within the captured port. To bring up the toolbar, tap the OSD Hotkey (Scroll
Lock or Ctrl), twice. The toolbar appears at the upper left corner of the screen:
Depending on the settings that were selected for ID Display (see page 80), the
Port Number and/or the Port Name display at the right of the toolbar. The
meanings of the toolbar icons are given in a table on page 63.
Note: When the toolbar displays, mouse input is confined to the toolbar area
and keyboard input has no effect. To carry out operations on the
computer connected to the port, you must recall the OSD and select the
port again.
Recalling the OSD
To dismiss the toolbar and bring back the OSD display (the Main,
Configuration, and Administration pages), tap the OSD Hotkey once. The OSD
Toolbar disappears, and the main OSD display reappears.
OSD Hotkey Summary Table
The following table presents a summary of the OSD Hotkey actions. See OSD
Hotkey , page 80 to set the OSD Hotkey.
To... When... Do This...
Open the OSD Toolbar The OSD Toolbar is not open Click the OSD Hotkey twice
Open the OSD The OSD Toolbar is open Click the OSD Hotkey once
Open the OSD The OSD Toolbar is not open Click the OSD Hotkey three
times
kn2116.book Page 62 Thursday, July 10, 2008 4:05 PM