Altusen ALTUSEN KN2116 Скачать руководство пользователя страница 57

Страница: 57 / 141

Chapter 3. Administration

Network

The Network dialog is used to specify the KN2108 / KN2116's network
environment. The box is divided into two panels: IP Address; and DNS Server.

IP Address

The KN2108 / KN2116 can either have its IP address assigned dynamically
(DHCP), or it can be given a fixed IP address.

For dynamic IP address assignment, select the

Obtain an IP address

automatically

, radio button.

To specify a fixed IP address, select the

Set IP address manually

, radio

button and fill in the IP address.

DNS Server

The KN2108 / KN2116 can either have its DNS Server address obtained
automatically, or it can be assigned manually.

For automatic DNS Server address assignment, select the

Obtain DNS

Server address automatically

, radio button.

To specify the DNS Server address manually, select the

Use the following

DNS Server

radio button, and fill in the addresses for the Primary and

Alternate DNS servers.

Note:

Specifying at the primary DNS Server address is mandatory. The
alternate DNS Server address is optional.

kn2116.book Page 41 Thursday, July 10, 2008 4:05 PM

Содержание ALTUSEN KN2116














































































































































Результаты поиска

Содержание ALTUSEN KN2116

Отзывы:

Altusen ALTUSEN KN2116, Руководство пользователя, Страница: 57 / 141

Результаты поиска

Содержание ALTUSEN KN2116

Отзывы: