Altusen ALTUSEN KL3116T, Руководство пользователя, Страница: 53 / 93

Chapter 4. OSD Operation
43
F5: SKP
This function enables you to easily skip backward or forward – switching the
console focus from the currently active computer port to the previous or next
available one.
Š
The selection of which computers are available for skip mode switching is
made with the
Scan–Skip mode setting under the F3: SET function (see
page 36).
Š
When you are in Skip mode, press:
Note: When you skip, you only skip to the previous or next available
computer that is in the
Scan–Skip mode selection (see SCAN–SKIP
MODE , page 37).
Š
If a port has been selected for Scan–Skip mode, when the focus switches to
that port a left/right triangle symbol appears before its Port ID display.
Š
While skip mode is in effect, the console will not function normally. You
must exit skip mode in order to regain control of the console.
Š
To exit skip mode, press [Spacebar] or [Esc] .
←
To skip from the current port to the previous port in the list.
→
To skip from the current port to the next port in the list.
↑
To skip from the current port to the last port of the previous
station in the list.
↓
To skip from the current port to the first port of the next station
in the list.
kl3116-3116t.book Page 43 Wednesday, June 1, 2011 1:28 PM