Altusen ALTUSEN CC2000 Скачать руководство пользователя страница 48

Страница: 48 / 271

CC2000 User Manual

Table Headings

An explanation of the column headings is provided in the table, below.

Note:

1. The headings at the top of the table don’t all appear for each view.

Which ones appear vary depending on the view selected.

2. You can change the sort order of the items by clicking on the column

headings.

Heading

Explanation

Name

The name given to the port when it was added to the CC2000
installation.

Alias

If you gave the port an alias, the alias name appears here.

Port

The port’s port number on the device it belongs to.

Port Type

Indicates the kind of device that the port belongs to.

Device Name The name of the device that the port belongs to.

Device Type

The type of device that the port belongs to (SNxxx, PNxxx, KNxxx,
Blade, etc.).

Options

For KVM ports, indicates the port’s

Access Mode

. See

Mode

page 112, for details.

For Serial ports, indicates the port’s

Operating Mode

. See

Port

Settings

, page 125, for details.

For Power outlets, indicates the port’s

Power Management

Configuration

. See

Port Settings

, page 119, for details.

This item is blank for Target device ports.

Status

For KVM ports, indicates whether the port is online or offline.

For Serial ports, indicates whether the port is online or offline.

For Power outlets, indicates whether the outlet port’s power socket is
On or Off.

Note:

This category does not apply to Blade Chassis or individual

blades, therefore

N/A

(not applicable) displays in this field for Blade

Chassis, and

Unknown

displays for individual blades.

IP Address

For physical devices – the device’s IP Address displays here.

MAC Address For physical devices – the device’s MAC Address displays here.

Operation

The default action for accessing the device/port appears in this cell.

Click the arrow at the right of the table cell to see what other actions
(if any), are available.

Click your choice to open a session for the device/port. The various
device/port operation choices are described in the

Port Operation

section that follows.

Link

Click to go to the device’s Device Management

→

Port page.

cc2k.book Page 34 Tuesday, December 21, 2010 4:00 PM

Содержание ALTUSEN CC2000
















































































































































































































































































Результаты поиска

Содержание ALTUSEN CC2000

Отзывы:

Altusen ALTUSEN CC2000, Руководство пользователя, Страница: 48 / 271

Результаты поиска

Содержание ALTUSEN CC2000

Отзывы: