manualshive.com logo in svg

Altusen ALTUSEN CC2000, Руководство пользователя, Страница: 232 / 271

Поделиться
Скачать
Altusen ALTUSEN CC2000 Скачать руководство пользователя страница 232

CC2000 User Manual

218

Key Firmware Upgrade

The CC2000 Authentication Key’s firmware is upgradable. As new revisions 
of the firmware become released, upgrade file are posted on our web site. 
Check the web site regularly to find the latest files and information relating to 
them.

Starting the Upgrade

To upgrade your firmware do the following:

1. Go to our website and download the new firmware file to a convenient 

location on your computer.

2. With the authentication key plugged in, run the 

Key Status Utility

 

(CCAuthKeyStatus.exe).

Note:

1.

CCAuthKeyStatus.exe

 only runs under Windows.

2. Firmware version 2.1.204 or higher is required for CC2000 

authentication keys to support the license upgrade function.

3.

KeyStatus.exe

, can be found on the CD that comes with the CC2000 

package. This file should be copied to a convenient location on your 
computer.

4. In the screen that appears, click 

F/W Upgrade...

(Continues on next page.)

cc2k.book  Page 218  Tuesday, December 21, 2010  4:00 PM

Содержание ALTUSEN CC2000
















































































































































































































































































Отзывы:

Нет отзывов