manualshive.com logo in svg

Altusen ALTUSEN CC2000, Руководство пользователя, Страница: 197 / 271

Поделиться
Скачать
Altusen ALTUSEN CC2000 Скачать руководство пользователя страница 197

Chapter 8. Logs

183

CC Log Options

The 

CC Log Options

 page gives you control over log file composition and 

maintenance. When you select 

Options

, a page similar to the one below 

appears:

The meanings of the configuration items are described in the table, below:

Item 

Description

Maintenance Click a radio button to select whether to maintain the log database on a 

days or records basis, then select the number of days or records to 
maintain the database for. When the number is reached, events are 
discarded on a “first in first out” basis. The valid range is from 7–90 days, 
and 1000–100,000 records.

Display

Sets the maximum number of events to display on the web page. The 
valid range is from 10–100.

Save

Click a radio button to select whether to save only the events that are 
displayed, or to save all the events that correspond to the selections 
made in the Events List (see 

Events

, below) when the log file is saved.

cc2k.book  Page 183  Tuesday, December 21, 2010  4:00 PM

Содержание ALTUSEN CC2000
















































































































































































































































































Отзывы:

Нет отзывов