manualshive.com logo in svg

Altusen ALTUSEN CC2000, Руководство пользователя, Страница: 169 / 271

Поделиться
Скачать
Altusen ALTUSEN CC2000 Скачать руководство пользователя страница 169

Chapter 7. System Management

155

Importing a Signed SSL Server Certificate

In order to avoid users having to go through the certificate acceptance prompt 
each time they log in, administrators may choose to use a third party certificate 
authority (CA) signed certificate.

To use a third party signed certificate, do the following:

1. After generating the self-signed certificate, click 

Get CSR

 (Certificate 

Signing Request) at the top-right of the panel. (See the screenshot on 
page 153.)

2. Go to the CA website of your choice and apply for an SSL certificate using 

the information generated in step 1.

3. After the CA sends you the certificate, open the 

Server Certificate

 page, 

click 

Update

 at the top-right of the panel.

4. Select 

Import a signed SSL server certificate

; then browse to where the 

certificate file is located and select it.

5. Click 

Save

 at the top-right of the panel.

Note:

Each of the certificate types mentioned in this section provides an equal 
level of security. The advantage of the changed self-signed certificate is 
that it allows you to provide more information than the installation 
certificate. The advantage of a CA third party certificate is that users do 
not have to go through the certificate acceptance prompt each time they 
log in, and it provides the additional assurance that a recognized 
authority has certified that the certificate is valid.

cc2k.book  Page 155  Tuesday, December 21, 2010  4:00 PM

Содержание ALTUSEN CC2000
















































































































































































































































































Отзывы:

Нет отзывов