Altusen ALTUSEN CC2000, Руководство пользователя, Страница: 165 / 271

Chapter 7. System Management
151
Security
This page provides a level of security by controlling access to the CC2000.
IP Filtering
IP filtering controls access to the CC2000 based on the IP addresses of the
computers attempting to connect to it.
Š
To enable IP filtering, check the Enable IP Filter checkbox.
Š
If the Include button is selected, all the addresses specified in the
Address List are allowed access; all other addresses are denied access.
Š
If the Exclude button is selected, all the addresses specified in the
Address List are denied access; all other addresses are allowed access.
Š
IP filters can consist of a single address, or a range of addresses. You can
add as many IP addresses as you require. Key the addresses directly into
the
IP address text input box as follows:
Š
For multiple single address entries, use a comma between the IP
addresses. There is no space before or after the commas.
Š
For a range of filters, key in the starting IP address, followed by a dash,
then the ending IP address.
Š
To modify or delete a filter, make your changes directly in the IP address
text input box.
cc2k.book Page 151 Tuesday, December 21, 2010 4:00 PM