Altusen ALTUSEN CC2000 Скачать руководство пользователя страница 143

Страница: 143 / 271

Chapter 6. Device Management

129

Unsupported Devices

Unsupported devices are ATEN/ALTUSEN devices whose firmware level is
not compatible with the CC2000’s current firmware level. Clicking

Unsupported Devices

on the Menu Bar brings up a page that lists all such

devices deployed on the CC2000 installation:

To make these devices available for management under the CC2000, their
firmware must be upgraded to the latest version. To do this, do the following:

1. Add the device’s firmware upgrade file to the CC2000. See

Appliance

Files

, page 175 for details on how to do this.

2. Once the device’s firmware upgrade file is stored on the CC2000, its

checkbox on this page becomes active. Click to put a check mark in the
checkbox.

3. Following Step 2, the

Firmware Upgrade

button, (at the top-right of the

panel), becomes active.

4. Click

Firmware Upgrade

to upgrade the device’s firmware.

Once the firmware upgrade completes, the device is removed from the
Unsupported Devices list, and now appears in the Available Devices list (see

Adding a Folder or Device

, page 80).

cc2k.book Page 129 Tuesday, December 21, 2010 4:00 PM

Содержание ALTUSEN CC2000
















































































































































































































































































Результаты поиска

Содержание ALTUSEN CC2000

Отзывы:

Altusen ALTUSEN CC2000, Руководство пользователя, Страница: 143 / 271

Результаты поиска

Содержание ALTUSEN CC2000

Отзывы: