Altusen ALTUSEN CC2000, Руководство пользователя, Страница: 137 / 271

Chapter 6. Device Management
123
6. When you have finished making your access rights settings, click Save .
The new users and groups are added to the device or port User/Group list.
„
Modifying a User’s or Group’s Rights
To modify a user’s or group’s rights to the device, station, or port, do the
following:
1. In the Configuration Rights column that corresponds to the user or group
you want to modify, click on the arrow; select Allowed or Denied ; then
click Close .
2. If a Device was selected, in the Access Rights column that corresponds to
the user or group you want to modify, click on the arrow; select
Administrator , User , View only , or No access .
3. If a Port was selected, in the Access Rights column that corresponds to the
user or group you want to modify, click on the arrow; select Telnet, SSH,
( or both of them); then click Close .
4. click Save (at the top-right of the panel).
„
Deleting a User’s or Group’s Rights
To remove a user’s or group’s rights to a device, station, or port, do the
following:
1. Click to put a check in the checkbox in front of the names of the users or
groups that you want to remove.
2. Click Delete (at the top-right of the panel).
„
Action Buttons
In addition to Add, Delete, and Save, there is an Update All button (at the top-
right of the panel). Clicking that button takes you to a page that lets you set the
configuration and access rights for all users and groups on the selected device
or port.
cc2k.book Page 123 Tuesday, December 21, 2010 4:00 PM