manualshive.com logo in svg

Altusen ALTUSEN CC2000, Руководство пользователя, Страница: 119 / 271

Поделиться
Скачать
Altusen ALTUSEN CC2000 Скачать руководство пользователя страница 119

Chapter 6. Device Management

105

Properties Page Action Buttons

When a top-level (non-nested) ATEN/ALTUSEN device is selected in the 
Sidebar or the Interactive Display Panel, a series of action buttons appear at the 
top-right of the Interactive Display Panel. The purpose of these buttons are 
explained in the following table:

When a port is selected only the 

Lock

, 

Unlock

 and 

Save

 buttons appear at the 

top-right of the page. These buttons allow you to lock and unlock the ports 
individually. See

Locking / Unlocking Ports

, page 99 for more information.

Button

Purpose

Update All

Clicking this button brings up a page listing all of the items nested 
underneath the top-level device. This page allows you to configure (or 
reconfigure) the Department, Location, Type, Description, and Trap 
Destination of each nested (child) item.

Lock All

If the total number of device nodes on the installation exceeds the 
number you have been licensed for, you can choose which device 
nodes to exclude by locking them. Click this button to lock all of the 
device’s ports. See

Locking / Unlocking Ports

, page 99 for more 

information.

Unlock All

If any of the device’s ports have been locked, click this button to unlock 
all of them.

Save

If you make any changes on the Properties page, click 

Save

 to save 

them and move on.

Update

If the installation information for a device doesn’t match the information 
for it stored in the CC2000’s database – for example, if an adapter is 
moved to a different port, or a new adapter is connected to a port – a 
question mark is added to its icon in the Sidebar and the 

Update

 button 

is enabled. Selecting the device in the Sidebar and clicking 

Update

 

causes the CC2000 to update the device’s installation information in its 
database.

Move

Click this button to move the device into a different folder. Select the 
target folder in the dialog box that comes up, then click 

OK

.

cc2k.book  Page 105  Tuesday, December 21, 2010  4:00 PM

Содержание ALTUSEN CC2000
















































































































































































































































































Отзывы:

Нет отзывов