Altusen ALTUSEN CC2000, Руководство пользователя, Страница: 110 / 271

CC2000 User Manual
96
„
Adding a Group Device
When you select Group Device as an item to be added, the Add Group Device
page comes up. The procedure for adding Group Devices is essentially the
same as that for adding Aggregate Devices. Follow the steps described in that
section (see page 85) to add a Group device and assign ports to it.
Note: 1. Refer back to Group Device , page 79, for an explanation of the
differences between Aggregate and Group devices.
2. A port can belong to any number of Group devices. When a port is
made part of a Group Device it retains the locked/unlocked status of
the original physical port. If you lock or unlock any of these ports, all
the ports – including the original physical port – change to the new
locked/unlocked status,
Modifying Devices
To modify a device’s settings, do the following:
1. Select Devices either in the Sidebar (if it is available), or on the main
menu bar (the orange bar).
2. Select the device you want to modify either from the Sidebar list, or in the
main panel list.
3. Make your changes using the links that become available on the Panel
Menu bar (the black bar). See Sidebar Device Configuration , page 103 for
details concerning these Panel Menus.
cc2k.book Page 96 Tuesday, December 21, 2010 4:00 PM