Altuscn KM0032 Скачать руководство пользователя страница 127 | Manualshive

Страница: 127 / 155

Altuscn KM0032 Скачать руководство пользователя страница 127

Chapter 12. RS-232 Port Operation

115

Restrictions

Only Super Administrators and Administrators can use this function. It is
not available to ordinary users.

Super Administrators or Administrators must log in through a serial
terminal connection (such as HyperTerminal).

A regular login connection (by any user) between the Console Module
being used for the RS-232 login and the KM0532 / KM0932 must be
established before the RS-232 login attempt.

The user profile for the Super Administrator or Administrator logging in
over the RS-232 port must exist in the database of the KM0532 / KM0932
that the Console Module is attached to.

Access rights:

Super Administrators can access consoles and ports that have been
given

Super Administrator

,

Administrator

, and

User

access rights.

Administrators can only access consoles and ports that have been given

Administrator

and

User

rights.

Switching of Console and KVM ports over the RS-232 connection
depends on the access rights of the user who is logged into the Console
Module via the Console Module port. Only the ports that the user has
access rights to are available.

«
...
125
126
127
128
129
...
»

Содержание KM0032




























































































































































Отзывы:

Нет отзывов