NetWayXT
- 1 -
Overview:
Altronix NetWayXT repeater modules interface with NetWay midspans to extend data (video) an additional 100m (328 ft.).
A maximum range of 600m (1968 ft.) is possible using multiple repeaters, based on camera/device port requirement.
Specifica tions:
Installation Instructions:
NetWayXT is not intended to be connected to outside plant leads.
1. Mount NetWayXT in desired location utilizing the mounting hole (Fig. 1a, pg. 1). Use a proper fastener and/or wall
anchor when securing NetWayXT to the wall.
2. Connect structured cable from port marked [OUT] on NetWay1/NetWay8/NetWay8M/NetWay16 or NetWay16M to
port marked [IN] on the NetWayXT (Fig. 1b, pg. 1).
3. Connect structured cable from port marked [OUT] on NetWayXT to the PoE camera/device or next NetWayXT
repeater
(Fig. 1b, pg. 1, Figs. 2-4, pg. 2 ).
4. Port status LEDs will illuminate on NetWayXT indicating the port is operational
(Fig. 1b, pg. 1, refer to Port LED definitions on pg. 1).
5. Power LED will illuminate indicating 12VDC output (Fig. 1b, pg. 1).
Port LED definitions for NetWayXT repeater:
Status
Green LED
Yellow LED
OFF
Indicates it is connected as 10Base-T or no link.
Indicates no link.
ON
Indicates it is connected as 100Base-TX.
Indicates a link.
Blinking
-------
Indicates activity.
Fig. 1 Fig. 1a
Fig. 1b
• UL/CUL Listed for Information
Technology Equipment
(UL 60950-1).
• CE approved.
• Repeater module extends range 100m (328 ft.) each.
• Port status LEDs.
• Compact insulated housing.
• Plug-and-play installation.
• Auto detection and protection of legacy non-PoE cameras.
• No external power required.
• Compatible with NetWay1/NetWay8/NetWay8M/
NetWay16 and NetWay16M.
NetwayXT
Repeater
IN
OUT
Power
Power
LED
Structured Cable from
NetWay1,
NetWay8, NetWay8M,
NetWay16, NetWay16M
or last NetWayXT
Structured
Cable to
PoE Camera/
Device or
next NetWayXT
Port Staus
LEDs
www.altronix.com
I.T.E. 43KC
NetWayXT - Repeater
®
Rev. 042409
