background image

Rev. 030408

Active UTP Transceiver Hub

with Integral Isolated Camera Power

Installation Guide

Models Include:

HubWayLD8Di HubWayLD16Di

-  UL Listed eight (8) Channel Active UTP 

-  UL Listed sixteen (16) Channel Active UTP

  Transceiver Hub with Integral Isolated Camera Power   Transceiver Hub with Integral Isolated Camera Power

HubWayLD82Di HubWayLD162Di

-  UL Listed eight (8) Channel Active UTP 

-  UL Listed sixteen (16) Channel Active UTP

  Transceiver Hub with Integral Isolated Camera Power   Transceiver Hub with Integral Isolated Camera Power
-  Includes eight (8) UL Listed Accessory   

-  Includes sixteen (16) UL Listed Accessory   

  HubWayAv Video Balun/Combiners 

  HubWayAv Video Balun/Combiners

HubWayLD83Di HubWayLD163Di

-  UL Listed eight (8) Channel Active UTP 

-  UL Listed sixteen (16) Channel Active UTP

  Transceiver Hub with Integral Isolated Camera Power   Transceiver Hub with Integral Isolated Camera Power
-  Includes eight (8) UL Listed Accessory   

-  Includes sixteen (16) UL Listed Accessory   

  HubWayDv Video Balun/Combiners 

  HubWayDv Video Balun/Combiners

More than just power.

TM

Video • Data • Power

Содержание HubWay ld









Отзывы: