Overview:
The Altronix ALTV288-300/220 CCTV Power Supply is designed with eight (8) individually fused outputs for powering CCTV
Cameras, environmental housings and other video accessories. It will provide 28VAC distributed via eight (8) fused outputs with a
total of 12 amps continuous supply current.
Specifications:
• Input 220VAC 50/60 Hz, 1.5 amp.
• 28 VAC output.
• Eight (8) individual fuse protected power
limited outputs.
• Output fuses are rated at 3.5 amps / 250VAC (Fig. 1).
• 12 amps (336VA) total supply current.
• Surge protection.
• AC power LED indicator
• Power ON/OFF switch.
• Spare fuse included.
• Unit maintains camera synchronization.
• Ease of installation saves time and
eliminates costly labor.
Enclosure dimensions: 12.25"H x 7.75"W x 4.5"D
Installation Instructions:
1. Mount ALTV288-300/220 in desired location
2. Slide switch SW1 (Fig. 1) to OFF position.
3. Connect the AC (220VAC 50/60 Hz) to the
black and white flying leads of the
transformer (Fig. 1).
4. Connect each camera to terminal pairs 1 to 8,
marked [1P-1N thru 8P - 8N] (Fig. 1).
Note: Is good operating practice to
measure output voltage before connecting
devices. All terminals with common suffix
P 1P, 2P...” are same polarity.
5. Slide switch SW1 (Fig. 1) to ON position.
6. Green LED will illuminate when AC power is present.
7. Upon completion of wiring, secure enclosure door
with screws (supplied).
8. Fuses F1 through F8 are rated 3.5 amps / 250VAC (Fig. 1).
WARNING: To reduce the risk of fire or electric shock, do not expose the unit to rain or moisture. This installation should be made by
qualified service personnel and should conform to all local codes and in accordance with the National Electrical Codes.
ALTV288-300/220 - High Current
CCTV Camera & Accessory Power Supply
Altronix is not responsible for any typographical errors. Product specifications are subject to change without notice.
PD8
MAIN FUSE
ON
OFF
N
C O M M O N P O W E R O U T P U T S
P
F U S E D P O W E R O U T P U T S
1
2
3
4
5
6
7
8
ALTRONIX CORP. MADE IN USA
BROOKLYN, NY 11220
D1
INPUT
R1
LED
XFMR
White
Lead
220 VAC
input
50/60 Hz,
1.5 amp
28 VAC fused output 1
(Follow same procedure
using terminals 2P & N
thru 8P & N fused
outputs 2 thru 8).
Black
Lead
Fig. 1
