NetWay1512:
• 12VDC/15W adapter for non-PoE compliant IP cameras.
NetWay3012:
• 12VDC/30W adapter for non-PoE compliant IP cameras.
• UL/CUL Listed for Information
Technology Equipment
(UL 60950-1).
• CE approved.
•
Power LED indicator.
• Compact insulated housing.
• Plug-and-play installation.
NetWay1512/NetWay3012
- 1 -
Overview:
Altronix NetWay1512 and NetWay3012 adapters allow operation of non-PoE compliant fixed and/or PTZ IP cameras with
NetWay midspans.
Installation Instructions:
NetWay1512/NetWay3012 is not intended to be connected to outside plant leads.
NetWay1512 for 12VDC IP cameras up to 15W:
1. Mount NetWay1512 in proximity to IP camera
(Fig. 1, pg. 1)
. Affix one side of velcro (supplied) to NetWay1512
and place the second side of the velcro in the desired location.
2. Connect structured cable from port marked [IN] on NetWay1512 to any ports marked [OUT] of NetWay1/NetWay8/
NetWay16
(Fig. 1, pg. 1)
.
3. Connect structured cable from port marked [OUT] on NetWay1512 to the IP camera
(Fig. 1, pg. 1)
.
4. Connect 12VDC output from NetWay1512 terminals marked [---12VDC +] to the power input of the
IP camera
(Fig. 1, pg. 1).
Polarity must be observed.
5. Power LED indicator will illuminate on NetWay1512 under normal conditions
(Fig. 1, pg. 1)
.
NetWay3012 for 12VDC IP fixed or PTZ cameras up to 30W:
1. Mount NetWay3012 in proximity to IP camera utilizing mounting hole
(Fig. 2, pg. 1)
. Use a proper fastener and/or
wall anchor when securing NetWay3012 to the wall.
2. Connect structured cable from port marked [IN] on NetWay3012 to ports marked [OUT 1 or 2] of NetWay8
or [OUT 1, 2, 9 or 10] of NetWay16
(Fig. 2, pg. 1)
.
3. Set Power Selector Switch of that corresponding port on NetWay8/NetWay16 to 30W (red LED will illuminate)
(Fig. 3a, pg. 2)
.
4. Connect structured cable from port marked [OUT] on NetWay3012 to the IP fixed or PTZ camera
(Fig. 2, pg. 1)
.
5. Connect 12VDC output from NetWay3012 terminals marked [---12VDC +] to the power input of the
IP camera
(Fig. 2, pg. 1).
Polarity must be observed.
6. Power LED indicator will illuminate on NetWay3012 under normal conditions
(Fig. 2, pg. 1)
.
Specifications:
Rev. 042109
NetWay1512 / NetWay3012 - Adapters
Fig. 1
Fig. 2
www.altronix.com
IN
OUT
Netway1512
Adapter
12VDC
---
12VDC
Power to
Camera
+
--
Structured Cable from
NetWay1, NetWay8
or NetWay16
Structured Cable
from IP Camera
I.T.E.
43KC
www.altronix.com
IN
OUT
Netway3012
Adapter
12VDC
+ Output ---
Power LED
12VDC
Power to
Camera
+
--
Structured Cable
from NetWay8
or NetWay16
Structured Cable
from IP Camera
I.T.E. 43KC
Common Specifications:
