background image

13

WARNING! BEFORE YOU ATTEMPT TO OPERATE THE MACHINE , PLEASE 

READ CAREFULLY AND UNDERSTAND THIS OPERATION MANUAL !!!

• 

Stay alert, watch what you are doing and use common sense when operating a power tool.

• 

Do not use equipment, when you are tired or under the influence of drugs, alcohol, or medication.

• 

Dress properly.

• 

Do not wear loose clothing or jewelry. Loose clothes, jewelry, or long hair can be caught in moving 

parts.

• 

Keep proper footing and balance at all times.

• 

Check all adjustments of the machine.

• 

Keep your hair, clothing and gloves away from moving parts.

• 

Use safety equipment and check all safety devices before start the engine.

• 

Hold the machine firmly.

• 

Extra care should be paid when operating the machine at the edges of digs, holes, etc. To avoid rolling 

over or falling down of the machine.

• 

The operation of the machine may require walking backwards, so be aware of the obstacles. Stepping 

in or tripping over such obstacles will cause the operator to lose control of the machine and can result 

in injury.

• 

Be sure that stop switch on your machine, is working properly. Ignition supply must be cut off at on

ce 

in case of emergency.

• 

When  you  are  going  to  leave  the  machine  after  termination  or  interruption  of  the  work,  secure  the 

machine from unauthorized use or accidental move.

• 

Machine must be operated by the reliable operators who read and understand the operation manual of 

age above 18.

• 

Keep your work area clean and well lit. Cluttered benches and dark areas may cause accidents.

• 

Know your work area! It is necessary to know possible obstacles, inclinations and underground utility 

lines.

• 

Before  starting  the  work,  inspect  the  machine  thoroughly;  check  all  safety  devices,  indicators  and 

controls.

• 

Do not operate power tools in explosive atmosphere, such as in the presence of flammable liquid, gases 

or dust.

• 

Never unattended the machine while the engine is running

• 

Keep children and visitors away while operating a power tool.

• 

Never run the engine in closed areas, unless proper ventilation is ensured.

• 

Concentrated exhaust fumes are dangerous to health.

• 

For the proper use of this equipment, please assure that the operator has been correctly informed of the 

content of this manual before using it.

General Instructions

Safety instructions while operating the machine

1 . SAFETY RULES

GB

Содержание OPTC12006





















Отзывы:

Похожие инструкции для OPTC12006