WARRANTY CERTIFICATE
AFBM 160
WARRANTY DECLARATION
We hereby declare:
That the product will perform seamlessly during the warranty period if the obstructions are observed.
That the service and necessary spare parts for the products will be provided within the warranty period as well as 5 years
after its expiry.
That during the warranty period, we will repair the product within 45 days at the latest at our own expense, which also
includes transport costs for the products that is the subject of the complaint.
I
f the mixer is not repaired in the aforementioned deadline, it will be replaced by a new one at your request. Transport costs
cannot exceed the valid costs of rail transport or mailing via postal services. The warranty becomes valid on the day of purchase,
which is verified with a confirmed warranty certificate and a confirmed receipt. If the product is repaired, the warranty period is
extended by the duration of the repair. Please provide the following information when notifying us of a malfunction: product
designation and type, date of purchase, description of the malfunction, and the exact address.
THE WARRANTY PERIOD is 12 months.
The warranty will be void:
If the usage of the mixer is incorrect or non-approved, or if the mixer is overloaded.
If the manufacturer’s written instructions are not observed.
If repairs are completed by an unauthorized person without the manufacturer’s consent.
The warranty for products is valid in the geographical area of the country in which the product
was sold.
WARRANTY PROVIDER
PRODUCT SELLER
Altrad Fort BV
______________________
SimonStevinstraat 6
______________________
4004 JV Tiel
______________________
Nederland
______________________
DATE OF HANDOVER
PRODUCT
IDENTIFICATION
_________________
____________________
4
Altrad Fort BV.
Simon Stevinstraat 6, 4004 JV Tiel
The Netherlands
tel.: +31 344 638 484 / [email protected]
www.altradfort.nl
DECLARATION OF CONFORMITY
Based on the European Community Machinery Directive 2006/42/EC, on
the Electromagnetic Compatibility Directive 2006/108/EC, on the Low
Voltage Directive 2006/95/EC, and the Noise Directive 2000/14/EC.
Altrad Fort BV
Simon Stevinstraat 6
4004 JV Tiel
The Netherlands
declares under its sole responsibility that during the development,
construction and production of
the AFBM 160 concrete mixer
the following standards were met:
2006/42/EC
EN 12151:2007, EN 60204-1:2006+2009+AC:2010 EN
60335-1:2012+AC:2014+A11:2014
EN 62233:2008+AC:2008
Director: H. Lindemann
DEAR CUSTOMER!
You have purchased a new concrete mixer. Our many years of experience
are an assurance that you have made the right choice. We have ensured a
high-quality production meeting strict European regulations, which ensure a
safe operation if these instructions are observed.
The mixer is intended for mixing construction materials.
EXPLANATION OF SYMBOLS ON THE MIXER
Before use, please read the operating
instructions for the mixer.
Before every repair, do not forget to unplug
the mixer from the electrical grid.
Before removing the cabinet cover, do not
forget to unplug the mixer from the electrical
grid.
The lubrication of drive gears is prohibited
at all times.
Reaching into a rotating drum is
dangerous and therefore prohibited.
Version 1.0
The observance of instructions and recommendations for the operation
and maintenance ensures safe operation and a long service life of the
mixer.
Electrical Safety
The mixer is manufactured according to the applicable regulations.
Double insulation ensures complete protection against electrical shock
therefore the product can be connected to the electrical grid without extra
protection.
This applies only to the single-phase motor.
Mechanical Safety
During the construction of the mixer, we have ensured complete safety of
the operator. All the dangerous spots are protected or constructed in order
to prevent injury.
Safety Warnings
Do not remove any protection elements from the mixer because they ensure a safe
operation.
The cabinet of the electrical motor shall be closed during operation. Reaching
into a rotating drum is prohibited. The power cable must not be
damaged. Lay the cable so that any damage will be prevented
during operation. Make sure not to place the mixer on the cable. The drum
can only be filled and emptied when it is rotating. The mixer can
only be started if the drum is empty. Do not use the mixer in an
explosive atmosphere. During operation (rotating of the drum), the mixer must not
move.
CAUTION! Double insulation machine
(applies only to the single-phase
motor)
During all repairs, original parts must be used in order to provide a
double insulation also after the repair!
CAUTION! Workplace materials
inhalation hazard
CAUTION! Mandatory use of
personal protective equipment
MIXER STORAGE
The mixer is stored in rooms with minimal risks for damage. Longer storage
periods require an enclosed and dry room. For shorter storage periods, no
special room is required. The storage temperature can be in the range
between -30°C and +50°C.
INSTRUCTIONS FOR DISPOSAL OF PRODUCT AND ITS
PACKAGING AFTER SERVICE LIFE
We recommend that you submit the product after the expiry of its service life
to authorized organizations for the collection of secondary metals.
Website:
http://www.altradfort.nl/
EN
1
