MN-35949 • Rev 04 • 06/16 • Combitherm® CT PROformance™ Series • Technical Service Manual • 9
Operation — CTP
CT PROformance™ Start-Up
Procedures
Turn on exhaust hood.
Turn on water supply.
Turn on gas supply valve
(if applicable).
Turn on main electrical power to appliance.
Press Power ON icon on the
appliance control panel.
The oven will automatically fill the steam generator
equipped models with water that will heat to a stand-by
mode temperature of 188°F (77°C).
NOTE:
To power off the appliance, press and hold the
power icon for 5 seconds to initiate power shut
down sequence to the oven. Oven will not shut
down during a cooking cycle. From time to time,
the control may become unresponsive. ONLY
when this happens, firmly press and hold the
power key for 10 seconds to power down the oven.
When the oven is powered
on, the PROtouch screen
illuminates. “Loading”
indicates that the software
is booting up. The screen
will also indicate what level
of progress has been made
as the software becomes
fully operational.
If, for any reason, the oven is turned off or loses power
during this start-up process, the operator will be
prompted to calibrate the Touch screen when the oven is
next powered up.
Return to Home Screen - Press the red arrow if the
PROtouch™ screen does not need to be calibrated.
Begin Calibration Process - Press the green check
mark if the Touch screen does need to be calibrated. The
screen will switch to a grey background. See illustration
at right. A crosshairs icon will appear. The operator
should touch the center intersection using a stylus for an
accurate calibration. This prompt and required action will
be repeated several times in different areas of the Touch
screen. When complete, the operator will be returned to
the Home screen.
NOTICE:
Accumulations on the main burners can result
in firing out of normal sequence. This delayed
ignition creates an alarmingly loud sound. If
your appliance makes an especially loud noise
when starting up, shut down your appliance and
call a qualified and trained service technician.
In the event of a power failure, the oven will not
operate.
DANGER
Before starting the appliance, make certain
you do not detect the odor of gas.
If you smell gas:
• Shut off the gas supply immediately.
• Do not attempt to light any appliance.
• Do not touch any electrical elements.
• Extinguish any open flame.
• Evacuate the area.
• Use a telephone outside the property and
immediately contact your gas supplier.
• If unable to contact your as supplier,
contact the fire department.
Содержание COMBITHERM CT PROFORMANCE 10-10E
Страница 181: ......
