Altinex SIGNAL MANAGEMENT SOLUTIONS TP315-103, Руководство пользователя

Страница: 1 / 8

TP315-103
HDMI OVER POWER EXTENSION CABLE, ANYWIRE TX
User’s Guide
400-0667-001 1
Welcome!
Everyone at Altinex greatly appreciates your purchase of the
TP315-103. We are confident that you will find it to be reliable
and simple to use. If you need support, please do not hesitate to
call us at 714-990-2300.
At Altinex, we are committed to developing unique and state of
the art Signal Management Solutions
®
for demanding
audiovisual installations. Welcome to the Altinex family of
satisfied customers around the world!
1. Precautions and Safety Warnings

Please read this manual entirely before using your
TP315-103. You can download a full version of this
manual at
www.altinex.com . These instructions ensure
reliable operation and to prevent fire and shock hazards.
Please read them carefully and heed all warnings.
1.1 General

Qualified Altinex service personnel or their authorized
representatives must perform all service.
1.2 Installation Precautions

To prevent fire or shock, do not expose this unit to water
or moisture. Do not place the TP315-103 in direct
sunlight, near heaters or heat-radiating appliances, or
near any liquid. Exposure to direct sunlight, smoke, or
steam can harm internal components.

Handle carefully; dropping or jarring can cause damage.

Do not pull any cables attached to the TP315-103.
1.3 Cleaning

Clean the TP315-103 with a dry cloth only. Never use
strong detergents or solvents such as alcohol or thinner.
1.4 FCC Notice

This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2)
this device must accept any interference received,
including interference that may cause undesired
operation.

This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 2
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when
the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions found herein, may cause
harmful interference to radio communications. Operation
of this equipment in a residential area is likely to cause
harmful interference in which case the user will be
required to correct the interference at their own expense.

Any changes or modifications to the unit not expressly
approved by Altinex
, Inc. could void the user’s authority to
operate the equipment.
2. Installation Procedures
Note: Download and read the entire online manual to become familiar with the
TP315-103 and for detailed installation instructions, including multiple
receiver wiring.
Step 1: Connect the TP315-103 Transmitter to the TP315-104 Receiver using a
standard AC extension cord. Use a 12 AWG cord if the full 15 A is required
at the receiver end.
One transmitter supports up to 4 receivers. Use 4 extension cords plugged
into the transmitter or daisy chain the receivers using extension cords.
Do NOT exceed 4 receivers from a single transmitter.
Step 2: Connect the TP315-103 to power using the attached power cord.
Step 3: Connect the source HDMI video (computer, Blu-ray, videoconference, etc.) to the HDMI input on the TP315-103 using the
HDMI cable provided.
Step 4. The AnyWire transmitter is now operating. Once the receiver is detected, video is displayed automatically.
Step 5. A display may be connected to the HDMI output on the TP315-103 for use as a local display.
Step 6. The AnyWire Transmitter/Receiver pair allows IR pass-through from the receiver (far side) to the transmitter (near side). An IR
emitter is included with the TP315-103 and may be connected to the HDMI source allowing control from a remote control
connected to the receiver on the far side of the AnyWire installation. The AnyWire receiver includes an IR receiver.
3. Warranty and Return Policies
Please visit the Altinex website at www.altinex.com for details on warranty and return policies. In the case of a unit needing repair,
please complete a RMA (return material authorization) form by clicking the Warranty link located on the bottom of the Altinex
homepage. Once completed, please email the form to
support@altinex.com .