SC206
SC206
SC206
SC206----204/205 Passive Audio Adapters
204/205 Passive Audio Adapters
204/205 Passive Audio Adapters
204/205 Passive Audio Adapters
User’s Guide
400-0471-004
1
Welcome!
We greatly appreciate your purchase of the SC206-204/205 Passive
Unbalanced to Balanced Audio Adapter. We are sure you will find it reliable
and simple to use. Superior performance for the right price, backed by solid
technical and customer support is what ALTINEX has to offer.
We are committed to providing our customers with
Signal Management Solutions
®
to the most demanding audiovisual
installations at very competitive pricing and we welcome you to join the
ranks of our many satisfied customers throughout the world.
1. Precautions and Safety Warnings
Please read this manual carefully before using your SC206-204/205. Keep this
manual handy for future reference. These safety instructions are to ensure
the long life of your SC206-204/205 and to prevent fire and shock hazards.
Please read them carefully and heed all warnings.
1.1 General
•
Qualified ALTINEX service personnel or their authorized
representatives must perform all service.
1.2 Installation Precautions
•
To prevent fire or shock, do not expose this unit to water or moisture.
Do not place the SC206-204/205 in direct sunlight, near heaters or
heat-radiating appliances, or near any liquid. Exposure to direct
sunlight, smoke, or steam can harm internal components.
•
Handle the SC206-204/205 carefully. Dropping or jarring can cause
damage.
•
Do not pull any cables that are attached to the SC206-204/205.
•
Insert the card carefully into the slots of the MultiTasker without
bending any edges.
1.3 Cleaning
•
Clean only the connector area with a dry cloth. Never use strong
detergents or solvents such as alcohol or thinner. Do not use a wet cloth
or water to clean the card. Do not clean or touch any component or
PCB.
1.4 FCC Notice
•
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
•
This equipment has been tested and found to comply with the limits for
a Class A digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions found herein, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is
likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
•
Any changes or modifications to the unit not expressly approved by
ALTINEX, Inc. could void the user’s authority to operate the
equipment.
2. Installation Procedures
Step 1.
Connect the input side of the SC206-204/205 to the output of the audio source. The audio source could be a sound card, VCR, DVD player, etc.
Step 2.
Wire the audio cables from the receiving device (amplifier, speakers, etc.) to the terminal block connectors provided with the unit.
Step 3.
Connect the terminal block connector to the output of the SC206-204/205.
Step 4.
The adapter is now operational. Verify the sound quality on the receiving end is equivalent to the input source.
3. Limited Warranty/Return policies
Please see the ALTINEX website at www.altinex.com for details on warranty and return policies.
AUDIO IN
SC206-204
SC206-205
LOOP OUT
RIGHT IN (RED)
LEFT IN (WHITE)
LEFT AUDIO+
LEFT AUDIO-
AUDIO COMMON
RIGHT AUDIO+
RIGHT AUDIO-
CABLE TIES
AUDIO OUTPUT
SC206-204
SC206-205
and
