VA6803SX/DA1
VA6803SX/DA1
VA6803SX/DA1
VA6803SX/DA1926AV
926AV
926AV
926AV
C
C
C
Compact
ompact
ompact
ompact A
A
A
Analog
nalog
nalog
nalog I
I
I
Interfaces
nterfaces
nterfaces
nterfaces
User’s Guide
400-0154-007
1
Welcome!
We greatly appreciate your purchase of the VA6803SX/DA1926AV Interface.
We are sure you will find it reliable and simple to use. Superior performance
for the right price, backed by solid technical and customer support is what
ALTINEX has to offer.
We are committed to providing our customers with
Signal Management Solutions
®
to the most demanding audiovisual
installations at very competitive pricing and we welcome you to join the
ranks of our many satisfied customers throughout the world.
1. Precautions and Safety Warnings
Please read this manual carefully before using your VA6803SX/DA1926AV.
Keep this manual handy for future reference. These safety instructions are to
ensure the long life of your unit and to prevent fire and shock hazards. Please
read them carefully and heed all warnings.
1.1 General
•
Qualified ALTINEX service personnel or their authorized
representatives must perform all service.
1.2 Installation Precautions
•
For best results, place the interface on a flat, leveled surface in a dry
area away from dust and moisture.
•
To prevent fire or shock, do not expose this unit to water or moisture.
Do not place the interface in direct sunlight, near heaters, or
heat-radiating appliances, or near any liquid. Exposure to direct
sunlight, smoke, or steam can harm internal components.
•
Handle the interface carefully. Dropping or jarring can damage the unit.
•
Do not pull any cables that are attached to the interface.
•
Do not place heavy objects on top of the interface.
•
If the interface is not used for an extended period, disconnect the
adapter from the wall to avoid fire, shock, and loss of power.
1.3 Cleaning
•
Unplug the VA6803SX/DA1926AV adapter before cleaning.
•
Clean only the connector area with a dry cloth. Never use strong
detergents or solvents such as alcohol or thinner. Do not use a wet cloth
or water to clean the unit.
1.4 FCC Notice
•
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
•
This equipment has been tested and found to comply with the limits for
a Class A digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions found herein, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is
likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
•
Any changes or modifications to the unit not expressly approved by
ALTINEX, Inc. could void the user’s authority to operate the
equipment.
2. Installation Procedures
Step 1. Connect the video and audio sources to the input ports on the interface. The inputs use standard audio and VGA-type cables.
Step 2. Connect the local video output of the VA6803SX/DA1926AV to the local monitor using standard VGA-type cable.
Step 3. Connect the local audio output of the VA6803SX/DA1926AV to the audio speakers at the local computer.
Step 4. Make the main video and audio output connections:
VA6803SX:
Connect the main out BNCs to the projector/monitor. Typically, either a 4 or 5-BNC coaxial cable is used: 4 BNCs for
composite sync devices (RGBS) and 5 BNCs for H&V sync devices (RGBHV).
DA1926AV:
The DA1926AV has 2 main outputs. Connect the projectors/monitors to the 15-pin HD main output connectors on the
DA1926AV using high-quality VGA-type cable. An unused output does NOT need to be terminated.
VA6803SX/DA1926AV: The main audio connects to the sound system amplifier using the terminal block connector; both interfaces can be wired for
balanced or unbalanced operation.
Step 5. Connect the external AC adapter provided with the unit to the interface and plug it in to AC power. The power indicator light on should turn on. The
LED will be red with power only and green if an input signal is present.
Step 6. Adjust the horizontal image position using the monitor or projector control. If further adjustments of the image are needed, use the knob located on the
left side of the VA6803SX.
Step 7. Adjust the equalization settings for the best image quality.
3. Limited Warranty/Return Policies
Please see the ALTINEX website at
www.altinex.com
for details on warranty and return policies.