Alti-2 D-90114 Скачать руководство пользователя страница 36 | Manualshive

Страница: 36 / 59

Alti-2 D-90114 Скачать руководство пользователя страница 36

D-90114 Manual, N3 User
Rev G

©2008, 2009 Alti-2, Inc

Page 35 of 58

5/27/2015

Backlight

Menu > Display Opt > Backlight Off

An electroluminescent backlight is included for night jumps. The back light will
only illuminate continuously during freefall and under canopy. Since the backlight
is a heavy drain on the battery charge, we recommend that you leave it

disabled

unless you are actually making a night jump. Before a night jump, fully charge
the battery to ensure that your N3 will have the full power throughout your entire
jump. Please be advised that the alarms and backlight cannot operate
simultaneously.

Therefore, if on a night jump and using N3 as a visual

altimeter, the alarms

must be disabled

in order for the backlight to

remain on throughout the entire jump. If the alarms are not disabled,
the backlight will go out each time an alarm sounds (freefall and canopy
alarm groups).

On the Menu screen, scroll to and select

Display Opt

.

The current state (if the backlight is On or Off) will
be displayed.

This screen shows that the backlight is Off.

This screen shows that the backlight is On.

On the Ground Screen, this symbol indicates the
backlight is on.

«
...
34
35
36
37
38
...
»

Содержание D-90114




























































Отзывы:

Нет отзывов