1.00
DEUTSCH
ENGLISH
ITALIANO
Softtel Plus + Jazz
Softtel Plus + Jazz
1.00
DEUTSCH
ENGLISH
ITALIANO
16
3. Connect the external line to the socket TEL-LINE using the straight cable.
4. Insert the headset stand to the base (the hole it’s on the right side of the
telephone).
Press the ON/OFF key: if you can hear the dial tone the installation is successfully
completed.
Programming
After installation the unit has to be programmed.
Setting date and time
Press the SET key: the display will show „SET1 DATE“. Press the SET key again to
set the date and hour. Using the two arrow keys set the right year. Press the SET
key to confirm. Repeat these steps for the month (M), day (D), hour type (12Hr o
24Hr), hour and minutes. Press STORE key to save the settings and press the DEL
key twice to exit from the setting menu.
Setting flash recall time
Press the SET key, using the two arrow keys to chose the „SET3 FLASH“ function
and press the SET key again to start with the setting. Using the two arrow keys
set the proper Flash time value (100, 300, 600 or 1000). Save the setting pressing
the STORE key. Press the DEL key to exit from the setting menu.
Setting display contrast
Press the SET key, using the two arrow keys to chose the „SET6 LCD“ function and
press the SET key again to start with the setting. Using the two arrow keys
adjust the brightness (LCD1, LCD2 to LCD6) of the display. Save the setting
pressing the STORE key. Press the DEL key to exit from the setting menu.
Setting dial pause
Press the SET key, using the two arrow keys to chose the „SET7 PAUSE“ function
and press the SET key again to start with the setting. Using the two arrow keys
adjust the desired dail pause (0,5, 1.0, 1.5 tp 4.0 s). Save the setting pressing the
STORE key. Press the DEL key to exit from the setting menu.
Programming the speed dial numbers
To store one phone number into the memory make the following steps:
17
·
Press the ON/OFF key;
·
Press the SET key;
·
Digit the phone number that you want to store in the memory, if necessary do
not forget the trunk acces code number if you are connected to a PABX;
·
Press the STORE key;
·
Press the number of the memory where to store the phone number (1..0);
·
Press the STORE key;
.
Press the ON/OFF key.
PLEASE NOTE:
Do not change the settings of SET2 CODE, SET4 AUTO IP and SET5 IP.
Operations
Answer a call
When you receive a call, press the ON/OFF key to start the connection. During the
connection the led USE is ON.
Making a call
To make a call press the ON/OFF key then digit the phone number to be called. To
end the call press the ON/OFF key. During the connection the led USE is ON.
It is possible to make a call using the DIAL key. In order to use this function digit
the phone number (to be called) then the DIAL key; the call starts immediately
without pressing the ON/OFF key.
Dial a speed dial number
To make a call using a speed dial number press the ON/OFF key then press the
RECALL button and select the desired speed dial number using the dial pad
(1..0).
Incoming calls review
Using the arrow key you can show the last 100 incoming calls with telephone
number, date and time. If you have received a call which was not answered the
NEW Led will flash. The call party identification will be stored.
Outgoing calls review
Press the OUT key and the arrow key to review the dialed calls forward or
backward (max 30 numbers).