Commissioning
Instruction manual 91/121 V6.3
Input 3
Minimum Maximum
Units of measure
-100,00
+100,00
%
Percentage value of input 3 of the summing block. This number follows the associated analog input signal via the appropriate I/O ana-
log input configuration menu.
Input 4
Minimum Maximum
Units of measure
-100,00
+100,00
%
Percentage value of input 4 of the summing block. This number follows the associated analog input signal via the appropriate I/O ana-
log input configuration menu.
Output Summ1
Minimum Maximum
Units of measure
-100,00
+100,00
%
Percentage value of the summation output 1 of the summing block. This number represents the sum of input 1 and input 2.
Output Summ2
Minimum Maximum
Units of measure
-100,00
+100,00
%
Percentage value of the summation output 2 of the summing block. This number represents the sum of input 3 and input 4.
Output Summ3
Minimum Maximum
Units of measure
-100,00
+100,00
%
Percentage value of the summation output 3 of the summing block. This number represents the sum of the summation output 1 and the
summation output 2 (if they have not been deactivated with the digital input).
Analog Reference
Set of parameters to set n.4 analog references stored inside the drive, which can be connected to some functional blocks to set con-
stant values.
An.Ref. X value
Minimum Maximum
Units of meas-
ure
-100.00
+100.00
%
This parameter sets the analogue reference to be sent to the selected destination with the next parameter. This value will be stored and
will remain valid even after disconnecting the auxiliary services.
An.Ref. X dest
Parameter that allows you to select the destination of the analogue reference; using the keys you can select the destination among
these:
•
NOT USED
: The analogue reference is not used.
•
ASW1 Input A
: The analogue reference is sent to ASW1 input A (see section 5.6.11 on page 68).
•
ASW1 Input B
: The analogue reference is sent to ASW1 input B (see section 5.6.11 on page 68).
•
ASW2Input A:
The analogue reference is sent to ASW2 input A (see section 5.6.11 on page 68).
•
ASW2Input B:
The analogue reference is sent to ASW2 input B (see section 5.6.11 on page 68).
•
ASW3Input A:
The analogue reference is sent to ASW3 input A (see section 5.6.11 on page 68).
•
ASW3Input B:
The analogue reference is sent to ASW3 input B (see section 5.6.11 on page 68).
•
ASW4Input A:
The analogue reference is sent to ASW4 input A (see section 5.6.11 on page 68).
•
ASW4Input B:
The analogue reference is sent to ASW4 input B (see section 5.6.11 on page 68).
•
Inp.1 SummBlock
: The analogue reference is sent to input 1 of the summing block (see section 5.6.10 on page 67).
•
Inp.2 SummBlock
: The analogue reference is sent to input 2 of the summing block (see section 5.6.10 on page 67).
•
Inp.3 SummBlock
: The analogue reference is sent to input 3 of the summing block (see section 5.6.10 on page 67).
•
Inp.4 SummBlock
: The analogue reference is sent to input 4 of the summing block (see section 5.6.10 on page 67).
50
Alter Elettronica s.r.l.
