manualshive.com logo in svg

Altendorf F45 ProDrive, Руководство по эксплуатации

Поделиться
Скачать
Altendorf F45 ProDrive Скачать руководство пользователя страница 76

   Transport, siting and installation

76

Transport, siting and installation

0000010038-003- GB

5.4.2

Sub rollers on the sliding table

Check the sub-rollers

The sub-rollers must run smoothly against the start slope at the start and end of 
the raceway. They should be set so that they can be held by hand with noticea-
ble force and that they slip while the sliding table is moved. 

Setting of the sub-rollers

The sub-rollers have eccentric bearings and can be adjusted.

The sub-rollers are set so that they can be held by hand with noticeable force 
and that they slip while the sliding table is moved. Adjusting them too tightly will 
result in stiff movement of the sliding table, and can lead to unwanted cutting 
results. 

Repeat this process for all sub-rollers.

Fig. 5-41

 Sub-rollers

Содержание F45 ProDrive
















































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды