IS0188 Rev A 04/15/22
Altelix LLC USA: 866-660-WIFI (9434) International: +1 561-660-9434 [email protected] www.altelix.com
Copyright (C) 2022 Altelix LLC. All rights reserved. Altelix and the Altelix logo are Trademarks and/or Registered Trademarks of Altelix LLC.
Specifications are subject to change without notice. See
www.altelix.com
for most current information
Assembly Guide
NHBS-RACK-6U
Page-4
WARNING: READ ALL INSTRUCTIONS BEFORE USE.
Assembling the Equipment Rack
The NHBS-RACK-6U requires assembly before being installed. The following
components are included:
(1) Equipment Rack Back Panel with Hinged Side Panels
(2) Adjustable Side Panels
(12) #M5 Assembly Screws and Nuts
(12) #10-32 Equipment Mounting Screws
(4) Wood Screws
(2) Concrete Anchors .
Equipment shown for reference, not included.
Step 4:
Adjust the side panels to the depth required for equipment
being installed into the rack. Panel depth: 9.5” min. / 15.5” max.
NHBS-RACK-6U Assembly
9.5” to 15.5”
Step 5:
Install the rack in the required location. Wood screws and concrete
anchors are provided in the hardware kit. #10-32 screws are
provided for securing equipment mounted in rack.
Got Questions?
We are here to help.
Contact us at:
USA & Canada: 866-660-9434
International: +1 561-660-9434
