background image

3. Technical Data

Bus system:

ISA-Bus, 16-bit

Dimensions:

180 mm x 100 mm. Component height above
printed circuit board is 11.8 mm.

Features:

PC Card Drive with standard PC Card BIOS extension.
2 x card slots type II or 1 x card slot type III. Slots are
accessed using either drivers built into the operating
system, CardWare

TM 

Software from AWARD or the altec

BIOS extension.

Operating systems:

Supports DOS, OS/2, Windows 3.x, Windows 95, Windows

NT.

BIOS extension:

8 kByte, with boot software and altec setup program,
configurable per jumper for addresses from C000h to FE00h
in 8 kByte steps.

Bootability:

Bootable without restriction under DOS and Windows;
Windows 95 and OS/2 bootable in HDD format without
media swap recognition.
(please ask about custom drivers).

Software:

CardWare

TM

 software from AWARD which supports both

memory cards and I/O cards (Socket Services und Card
Services).

Power  requirements:

5V 150 mA (without PC Card), max. 1A per card slot. 12V is
only required for memory cards which need 12V write
voltage.

Temperature range:

Operation:

0°C to +70°C

Moisture:

0 to 90% (non-condensing)

Storage:

-40°C to +75°C

Moisture:

0 to 90% (non-condensing)

Firmware  update:

The altec BIOS extension firmware can be updated by
software.

Содержание ISA-Slot













Отзывы: