17
+31(0)78 - 615 20 33
[email protected]
www.altec.nl
+32(0)2 - 270 34 88
[email protected]
www.altec.be
NL
BE
3.3
Loading media
3.3.1
Placing media in the printer
1.
Open the top cover of the printer by pulling the
green
levers
- located on each side of the printer - and
lifting the top cover to the maximum open angle.
2.
Make sure the (square)
lock
of the label holders is
set to open.
3.
Separate and hold the
media holders
open.
