3.
Charging:
When charging, a red LED light will illuminate. The light will turn blue
when your unit is fully charged. Your headphones can take up to two
hours to fully charge.
2. For a look at the various buttons and parts of your headphones,
view the graphic below.
5.
Pairing Your Headphones With a Bluetooth Phone
-Press the Power button for around five seconds. When your
headphone is ready to pair with a Bluetooth audio source, it will go
into pairing mode, with red and blue LED lights will flash alternately.
-Go to the Bluetooth Manager of your Bluetooth device. Search
Bluetooth devices and select "Altec In-ear BT" to start connecting.
-If required, enter the PIN code "0000" and confirm the entry. Once
paired, the headphone will connect to your Bluetooth device
automatically.
6.
Wearing Your Headphones
For the best sound performance and a secure, comfortable fit, be sure that
the ear buds rest gently in your ear and drape around the back of your neck.
Note that the included ear caps come in three different sizes. Use the ear
cap that feels most comfortable in your ear.
4.
Power ON/Power OFF Your Headphones:
-Press and hold the Power button for approximately three seconds to power
on your headphones. Your headphones will automatically connect with the
last phone they were paired with.
-Once powered on, you can press and hold the
Power button again for approximately five
seconds to power off your headphones. The
LED Indicator light will briefly turn red before
powering off.
NOTE:
To conserve power, the headphone
will turn off automatically if it's not
connected to a device over 10
minutes.
1. Make sure the following items are
included in your package.
7.
Listening to Music
Play/Pause
Press the Power button to get music from your audio source to play or pause.
Next/Previous Song
Press and hold the Volume Up or Volume
Down buttons for two seconds to advance to
the next song or go back to the previous one.
Increase/Decrease Volume
Press the Volume Up or Volume
Down buttons to increase or decrease the
volume.
NOTE:
Music will automatically pause when
a call is dialed out or when there is
an incoming call. It will resume when
the call ends.
8.
Using Your Headphones During Phone Calls
Last Number Redialing
Quickly tap on the Answer button twice and the last
number that you dialed will be redialed.
Answering an Incoming Call
To answer an incoming call, quickly press the
Answer button.
Ending a Call
To end a call, quickly press the Answer
button, and the call will be disconnected.
Adjusting Volume
By pressing the Volume Up or Volume
Down buttons you can increase or
decrease the volume of the phone call.
3 Seconds
5 Seconds
12:12 PM
Bluetooth
Bluetooth
Devices
Paired
ON
Now discoverable
Altec In-ear BT
Ear Caps
(three sizes for maximum comfort)
USB Cable
Ear Cap
Volume Up/Next
Power/play/Answer
Volume Down/Previous
Charging Port
Microphone
LED
Indicater
MZW101
Stereo Earphones
Middle
Large
Small
STEREO EARPHONES
WIRELESS
Item # MZW101
Quick Start Guide
