269 020 584 E 0806
Additives & Instruments
A member of
Measure what you see.
BYK-Gardner GmbH
· Lausitzer Strasse 8 · 82538 Geretsried · Germany · Tel. +49-8171-3493-0 · Fax +49-8171-3493-140 · www.byk.com/instruments
Full instruction manual in English may be downloaded fr
om byk.com/instruments
ENGLISH
byko-drive XL Applicator
How to start the byko-drive XL?
•
Connect the power supply (rear of instrument)
•
Turn on power switch (rear of instrument)
•
Setup drawdown parameters using touch screen
•
Begin drawdown by pressing the Start button
How to prepare drawdowns?
•
Level the instrument using the adjustable feet
•
Use the Setup screen to select drawdown parameters
•
Select a drawdown substrate and place it on the vacuum plate
•
Turn on the appropriate vacuum plate area (If using a glass plate
version fi x the substrate in place with the paper clamp)
•
Place the drawdown bar or rod of your choice in front of the pushbar
•
If needed, place the weight on top of the bar or rod
•
Add your coating in front of bar or rod
•
Press the Start button
•
At the end of travel, remove the drawdown bar or rod
•
Press the Return button
•
Turn off vacuum and remove substrate
Caution! Read the instruction manual and all safety warnings before using this instrument.
The byko-drive XL Applicator has moving parts which should never be touched during operation.
A.
Tool/accessory tray
B.
Pushbar
C.
Weight guide slot
D.
Wire rod clearance slot
E.
Dual-zone vacuum plate (vacuum model only)
F.
Drip
pan
G.
Color touch screen display
H.
Adjustable feet (underneath)
A
B
D
C
H
G
F
E
