Altai Technologies Ltd. All rights reserved
C1n Series WIFI AP/CPE Web-admin Configuration Manual
TPS15-003_rev1.3
Cipher Mode
: Specify the data encryption mechanism for bridge link. It provides 3
options: “Disable”, “WEP” and “AES”.
“Disable” - no encryption is used for data transmission over the bridge link.
“WEP” - WEP encryption is used for data transmission over the bridge link. The type of
WEP encryption and key settings are determined by the entries in the WEP Key Table.
“AES” - AES encryption is used for packet encryption over the bridge link. A 128-bit
HEX pass phrase is required.
Default WEP Key
: Specify which WEP key is used; this option is available only if cipher
mode is set as “WEP”
Pass Phrase
: Specify a 128-Bits HEX key for AES; this option is available only if cipher
mode is set as “AES”
Warning: The configuration of bridge security MUST be the same in both bridge
peers; otherwise the bridge link cannot be established.
5.4.1.4.2.3.
QoS Setting
The QoS configuration in Bridge mode is as the same as that in AP mode. For the
detail of QoS configuration in Station mode, please refer to section
WLAN X(0-15)
QoS
for more details.
Figure 5-56 5G bridge Qos setting
5.5.
Thin AP Configuration
C1n Series AP/CPE support thin AP mode. In thin AP mode user need an Access
Controller (AC) to control and manage all the APs.
